Info: 'The serial number ^0 is in use by another copy of IN CONTROL.Each person who uses IN CONTROL at the same time must own a separate copy.'
3:
Bounds: x1=76, y1=116, x2=380, y2=152
Type: -120
Info: 'To buy another copy of IN CONTROL, please see your local dealer or contact:'
4:
Bounds: x1=72, y1=152, x2=346, y2=190
Type: 64
Info: '·'
5:
Bounds: x1=16, y1=216, x2=274, y2=242
Type: 64
Info: '‰'
DITL_1507.txt
Items: (5 entries)
0:
Bounds: x1=312, y1=214, x2=386, y2=234
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=16, x2=48, y2=48
Type: -96
Info: '‚'
2:
Bounds: x1=72, y1=16, x2=396, y2=80
Type: -120
Info: 'Welcome to the demo version of IN CONTROL.You can add only 10 topics to a file. '
3:
Bounds: x1=72, y1=80, x2=376, y2=148
Type: -120
Info: 'To get the full version, quit and re-enter your name and the correct serial number. To buy IN CONTROL, please see your local dealer or contact:'
4:
Bounds: x1=72, y1=152, x2=346, y2=190
Type: 64
Info: '·'
DITL_1506.txt
Items: (5 entries)
0:
Bounds: x1=312, y1=214, x2=386, y2=234
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=16, x2=48, y2=48
Type: -96
Info: '‚'
2:
Bounds: x1=72, y1=16, x2=394, y2=112
Type: -120
Info: 'Welcome to IN CONTROL™.This demonstration version is limited only in that you can’t add more than 10 topics to the file. Files that you create are fully compatible with the full working version.'
3:
Bounds: x1=72, y1=168, x2=346, y2=206
Type: 64
Info: '·'
4:
Bounds: x1=72, y1=128, x2=376, y2=160
Type: -120
Info: 'To obtain a full working copy of IN CONTROL, please see your local dealer or contact:'
DITL_1505.txt
Items: (4 entries)
0:
Bounds: x1=316, y1=168, x2=390, y2=188
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=20, x2=48, y2=52
Type: -96
Info: ' '
2:
Bounds: x1=70, y1=16, x2=392, y2=112
Type: -120
Info: 'This is a demonstration version of IN CONTROL™. With this version you can add only 10 topics to the file.To obtain a full working copy of IN CONTROL, please see your local dealer or contact:'
3:
Bounds: x1=72, y1=116, x2=346, y2=154
Type: 64
Info: '·'
DITL_1504.txt
Items: (4 entries)
0:
Bounds: x1=312, y1=162, x2=386, y2=182
Type: 4
Info: 'Quit'
1:
Bounds: x1=16, y1=16, x2=48, y2=48
Type: -96
Info: ' '
2:
Bounds: x1=72, y1=16, x2=396, y2=52
Type: -120
Info: 'Your Name & Organization could not be saved. Please ensure that:'
3:
Bounds: x1=72, y1=52, x2=396, y2=148
Type: -120
Info: ' • “IN CONTROL” is not write protected. • The disk containing “IN CONTROL” is not full. • All anti-virus software is disabled. • You have access privileges to “IN CONTROL” if you are using a file server.'
DITL_1501.txt
Items: (10 entries)
0:
Bounds: x1=252, y1=167, x2=332, y2=187
Type: 4
Info: 'Link'
1:
Bounds: x1=252, y1=136, x2=332, y2=156
Type: 4
Info: 'Cancel'
2:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -127
Info: ' Ëf'
3:
Bounds: x1=235, y1=40, x2=337, y2=56
Type: 0
Info: ''
4:
Bounds: x1=252, y1=64, x2=332, y2=84
Type: 4
Info: 'Eject'
5:
Bounds: x1=252, y1=92, x2=332, y2=112
Type: 4
Info: 'Desktop'
6:
Bounds: x1=12, y1=61, x2=230, y2=191
Type: 0
Info: ''
7:
Bounds: x1=12, y1=38, x2=230, y2=57
Type: 0
Info: ''
8:
Bounds: x1=251, y1=123, x2=333, y2=124
Type: -64
Info: ' '
9:
Bounds: x1=12, y1=8, x2=328, y2=28
Type: -120
Info: 'Choose the Document or Application to Link:'
DITL_1500.txt
Items: (4 entries)
0:
Bounds: x1=204, y1=92, x2=408, y2=108
Type: -120
Info: '^0'
1:
Bounds: x1=204, y1=112, x2=412, y2=128
Type: -120
Info: '^1'
2:
Bounds: x1=16, y1=16, x2=432, y2=269
Type: -64
Info: '›'
3:
Bounds: x1=204, y1=132, x2=412, y2=148
Type: -120
Info: '^2'
DITL_1014.txt
Items: (4 entries)
0:
Bounds: x1=316, y1=140, x2=392, y2=160
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=12, x2=406, y2=126
Type: -120
Info: 'When the file “^0” was last saved on this Macintosh, the next reminder was at:^1.The next reminder in this file is now at:^2.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=80, y1=136, x2=279, y2=161
Type: 64
Info: 'ˆ'
DITL_1013.txt
Items: (3 entries)
0:
Bounds: x1=252, y1=76, x2=326, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=328, y2=68
Type: -120
Info: 'To resize the column to the left of a hidden column, hold down the Option key before dragging.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1012.txt
Items: (3 entries)
0:
Bounds: x1=248, y1=128, x2=322, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=324, y2=108
Type: -120
Info: 'No displayed topics are assigned to this day.To assign a topic to this day, drag the topic to this day or enter this date in the left-most Date-Time column.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1011.txt
Items: (3 entries)
0:
Bounds: x1=248, y1=144, x2=322, y2=164
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=332, y2=124
Type: -120
Info: 'No Date-Time column is visible.To put a topic on a specific date, first:• use the New Column command to create a column of type Date-Time, or• if an existing Date-Time column is hidden, drag its divider to the right.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1010.txt
Items: (3 entries)
0:
Bounds: x1=232, y1=84, x2=300, y2=104
Type: 4
Info: 'OK'
1:
Bounds: x1=76, y1=12, x2=312, y2=80
Type: -120
Info: 'This script could not be completed because hiding checked topics would hide all the topics.'
2:
Bounds: x1=20, y1=12, x2=52, y2=44
Type: -96
Info: ' '
DITL_1007.txt
Items: (3 entries)
0:
Bounds: x1=240, y1=128, x2=316, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=12, x2=316, y2=108
Type: -120
Info: 'The disk copy of “^0” has been updated by another user. To see the updated file (and discard any changes you have made), choose Revert from the File menu.'
2:
Bounds: x1=20, y1=12, x2=52, y2=44
Type: -96
Info: ' '
DITL_1006.txt
Items: (4 entries)
0:
Bounds: x1=244, y1=144, x2=320, y2=164
Type: 4
Info: 'Open'
1:
Bounds: x1=144, y1=144, x2=220, y2=164
Type: 4
Info: 'Cancel'
2:
Bounds: x1=72, y1=12, x2=316, y2=132
Type: -120
Info: '“^0” is locked or in use. You will not be able to save your changes, but you can use the Save As command to create a new file.Open this file anyway?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1005.txt
Items: (4 entries)
0:
Bounds: x1=248, y1=128, x2=309, y2=148
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=12, x2=312, y2=112
Type: -120
Info: 'Because the Claris XTND System isn’t installed, you can import or export only IN CONTROL files. To import or export other files, follow the installation instructions in your IN CONTROL Owner’s Manual.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=72, y1=132, x2=236, y2=148
Type: -120
Info: '(reason code ^0)'
DITL_1004.txt
Items: (4 entries)
0:
Bounds: x1=228, y1=152, x2=304, y2=172
Type: 4
Info: 'Convert'
1:
Bounds: x1=136, y1=152, x2=212, y2=172
Type: 4
Info: 'Cancel'
2:
Bounds: x1=72, y1=12, x2=308, y2=132
Type: -120
Info: 'This file was created using an older version of IN CONTROL and needs to be converted. If you save this file, only IN CONTROL version 2.0 or later will be able to open it.Convert this file?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1003.txt
Items: (4 entries)
0:
Bounds: x1=272, y1=96, x2=346, y2=116
Type: 4
Info: 'Delete'
1:
Bounds: x1=172, y1=96, x2=246, y2=116
Type: 4
Info: 'Cancel'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
3:
Bounds: x1=71, y1=11, x2=364, y2=88
Type: -120
Info: 'Remove these topics and their sub-topics?Topics: ^0Sub-topics: ^1'
DITL_1002.txt
Items: (3 entries)
0:
Bounds: x1=196, y1=92, x2=270, y2=112
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=284, y2=80
Type: -120
Info: 'This value isn’t in the Data List. IN CONTROL can only match values that are in the Data List when using <, ≤, ≥, or >.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1001.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=94, x2=272, y2=114
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=81
Type: -120
Info: 'No topics match. IN CONTROL can only match values that are in the Data List when using <, ≤, ≥, or >.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_1000.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=46, x2=272, y2=66
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=26
Type: -120
Info: 'No topics match.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_300.txt
Items: (3 entries)
0:
Bounds: x1=216, y1=88, x2=296, y2=108
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=10, x2=296, y2=76
Type: -120
Info: '^0; the previous value was substituted.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_261.txt
Items: (1 entries)
0:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: -128
Info: ''
DITL_258.txt
Items: (3 entries)
0:
Bounds: x1=16, y1=72, x2=76, y2=92
Type: 4
Info: 'Cancel'
1:
Bounds: x1=96, y1=72, x2=246, y2=92
Type: 4
Info: 'Cancel All Printing'
2:
Bounds: x1=50, y1=16, x2=330, y2=60
Type: -120
Info: '“<<<>>>” is now being printed.'
DITL_257.txt
Items: (2 entries)
0:
Bounds: x1=24, y1=72, x2=84, y2=92
Type: 4
Info: 'Cancel'
1:
Bounds: x1=24, y1=16, x2=280, y2=60
Type: -120
Info: '“<<<>>>” is now being printed.'
DITL_251.txt
Items: (3 entries)
0:
Bounds: x1=184, y1=64, x2=264, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=12, x2=262, y2=52
Type: 8
Info: 'This document has no pages within the requested range.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: 32
Info: ' '
DITL_151.txt
Items: (3 entries)
0:
Bounds: x1=196, y1=76, x2=270, y2=96
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=64
Type: -120
Info: 'Cannot remember the styles associated with the text. The text is intact, however.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_150.txt
Items: (3 entries)
0:
Bounds: x1=196, y1=64, x2=270, y2=84
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=52
Type: -120
Info: 'Cannot add any more characters here.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_138.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=78, x2=272, y2=98
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=78, x2=94, y2=98
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=272, y2=75
Type: -120
Info: '“^0” can’t be opened for writing. Do you want to open it anyway?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_137.txt
Items: (3 entries)
0:
Bounds: x1=200, y1=84, x2=274, y2=104
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=68
Type: -120
Info: 'Your computer lacks the required hardware or system software to run IN CONTROL.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_136.txt
Items: (3 entries)
0:
Bounds: x1=260, y1=150, x2=334, y2=170
Type: 4
Info: 'OK'
1:
Bounds: x1=72, y1=12, x2=336, y2=140
Type: -120
Info: 'Memory space is low. Some commands may be disabled.If you are using MultiFinder or System 7, you can allocate more memory to IN CONTROL. Quit IN CONTROL, then use the Finder’s Get Info command to increase the memory size for IN CONTROL.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_135.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=68, x2=272, y2=88
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=65
Type: -120
Info: '“^0” is already open.'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_134.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=123, x2=272, y2=143
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=123, x2=94, y2=143
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=272, y2=120
Type: -120
Info: 'There is not enough disk space to save the document unless the existing copy is deleted first. Delete existing copy of “^0”?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_133.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=108, x2=272, y2=128
Type: 4
Info: 'OK'
1:
Bounds: x1=20, y1=108, x2=94, y2=128
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=272, y2=105
Type: -120
Info: 'The disk copy of “^0” was changed since you last opened or saved it. Do you want to ^1 anyway?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_132.txt
Items: (4 entries)
0:
Bounds: x1=198, y1=78, x2=272, y2=98
Type: 4
Info: 'Revert'
1:
Bounds: x1=20, y1=78, x2=94, y2=98
Type: 4
Info: 'Cancel'
2:
Bounds: x1=70, y1=10, x2=272, y2=72
Type: -120
Info: 'Do you want to discard changes made to “^0”?'
3:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_131.txt
Items: (5 entries)
0:
Bounds: x1=304, y1=80, x2=369, y2=100
Type: 4
Info: 'Save'
1:
Bounds: x1=220, y1=80, x2=286, y2=100
Type: 4
Info: 'Cancel'
2:
Bounds: x1=80, y1=80, x2=168, y2=100
Type: 4
Info: 'Don’t Save'
3:
Bounds: x1=80, y1=12, x2=368, y2=68
Type: -120
Info: 'Save changes to “^0” before ^1?'
4:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_130.txt
Items: (3 entries)
0:
Bounds: x1=200, y1=124, x2=274, y2=144
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=276, y2=116
Type: -120
Info: 'Could not complete your request because ^0. ^1'
2:
Bounds: x1=20, y1=10, x2=52, y2=42
Type: -96
Info: ' '
DITL_129.txt
Items: (3 entries)
0:
Bounds: x1=198, y1=120, x2=272, y2=138
Type: 4
Info: 'OK'
1:
Bounds: x1=70, y1=10, x2=272, y2=115
Type: -120
Info: 'Could not complete the “^2” command because ^0. ^1'
